|
Oscilloscope Cross Reference
Competitors Cross Reference
DMM Accessory Kits
Probe Bodies
DMM Clips
Adapters
Sheathed Leads
Probes with Leads
Probes with Leads, UL
High Voltage Probes
RF Probes
Clips, IP2X
Fused Probes
High Capacity Fused Probes
Clips, 8-32 Thread
Kelvin Leads
|
|
| Probes with Leads |
| With the standard 4mm sheathed plug interface, this selection of probe leads fits all popular DMMs from Fluke, B&K Precision, and others. The probe leads are available with two tip styles. All are designed to IEC 61010-031 and carry CSA listing. Lengths measured in centimeters. |
| |
 |
2 mm Pin Tip Probe to Sheathed Plug
Standard 2 mm (0.080") diameter probe tip. Connector is 4mm straight sheathed banana plug. Ideal for bench meter use. Lead jacket material is highly flexible Silicone. |
|
 |
2 mm Pin Tip Probe to Right-Angle Sheathed Plug
Standard 2 mm (0.080") diameter probe tip. Connector is 4mm right-angle sheathed banana plug. Ideal for hand-held meter use. Lead jacket material is highly flexible Silicone. |
|
 |
4 mm Contact Tip Probe to Sheathed Plug
Standard 4 mm banana contact on probe tip. Can plug directly into a 4mm jack or accept CT2676-# Sprung hook. Connector is 4mm straight sheathed banana plug. Ideal for bench meter use. Lead jacket material is highly flexible Silicone. |
|
 |
4 mm Contact Tip Probe to Right-Angle Sheathed Plug
Standard 4 mm banana contact on probe tip. Can plug directly into a 4mm jack or accept CT2676-# Sprung hook. Connector is 4mm right-angle sheathed banana plug. Ideal for hand-held meter use. Lead jacket material is highly flexible Silicone. |
|
|
